You’ve decided to tile your backsplash but, as you’re figuring out how to go about it, you realize you’ve got an electrical outlet right in the middle of the backsplash!
How on earth do you tile around the outlet and keep the cover plate flush with the tile? Fortunately, with our step-by-step guide, the job just got a lot easier!
0 Comments
Installing a kitchen backsplash is a simple and attainable DIY tiling project, especially for the first time tile installer. There is little prep, mess is minimal and cost is low; the result, however, is monumental!
Since most DIY backsplash tiling is done as part of a renovation, there is some prep work required, but there are some tips and tricks to make it easier. If you have an existing, outdated tiled backsplash, you may even be able to tile directly over top of the old tiles, to save on tear-out and hassle! Keep reading for some handy tips to make sure your first tiling job turns out right. Tired of your outdated tiles? Do you want to replace them with something fresh? Don't tear out your old tile: just tile over it!
Vinyl plank flooring has received plenty of attention in the past few years, in part because it is so easy to install over older, existing flooring, but with today’s modern primers and thinsets, you can easily tile over an older, outdated tiled or vinyl surface, with no mess and no fuss! Tiling a ceiling used to be a relatively easy job. Tiles were small and lightweight with ceramic bodies, which absorbed water from the thinset, resulting in a fast thinset cure and few tiles dropped while the thinset was curing. Fast forward to today when tiles are often made of porcelain which absorbs very little water. This means a slow thinset cure time and a greater chance of a tile dropping while curing.
Porcelain is also heavy compared to ceramic, and that combined with large tile sizes and small grout joints means that very little air can enter the joints, slowing down curing time and creating a precarious situation! Here is how to keep the tiles up on the ceiling where they belong. Natural stone stacked ledgestone and split face stone cladding are popular wall covering options for many applications, including fireplaces and feature walls.
The success of any installation depends on the job preparation and ledgestone requires several techniques which differ from a regular tile installation, because of the weight and thickness of the stone. So, to ensure the success of your ledgestone installation, make sure to follow these tips! Tile may seem like an intimidating home renovation project, if you've never done it before, but like most other projects, success lies in proper preparation and tools. If you are prepared beforehand, then tiling is not difficult at all. If you have been considering starting a tiling project, then you are in the right place!
|
Archives
March 2025
Categories |